Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Locking screw for slide device |
(2) | Slide device |
(3) | Transport handle |
(4) | Protective guard |
(5) | On/Off switch for laser (cutting line indication) |
(6) | On/Off switch for worklight |
(7) | Lock-off function for On/Off switch |
(8) | On/off switch |
(9) | Handle |
(10) | Laser protection cap |
(11) | Laser beam outlet aperture |
(12) | Retracting blade guard |
(13) | Guide roller |
(14) | Saw table |
(15) | Mounting holes |
(16) | Insert plate |
(17) | Locking clamp |
(18) | Locking knob for all mitre angles (horizontal) |
(19) | Mitre pre-setting lever |
(20) | Tilt protector |
(21) | Laser warning label |
(22) | Detents for standard mitre angles |
(23) | Scale for mitre angles |
(24) | Clamping screw for saw table extension |
(25) | Saw Table Extension |
(26) | Workpiece support (flexibly pluggable) |
(27) | Fixed fence |
(28) | Adjustable fence |
(29) | Scale for bevel angles (vertical) |
(30) | Angle indicator for bevel angles |
(31) | Chip deflector |
(32) | Saw blade |
(33) | Spindle lock |
(34) | Transport safety lock |
(35) | Tilt protector |
(36) | Length stop |
(37) | Dust bag |
(38) | Depth stop adjusting screw |
(39) | Depth stop |
(40) | Threaded rod |
(41) | Screw clamp |
(42) | Holes for screw clamp |
(43) | Hex key/slotted screwdriver |
(44) | Locking screw for the adjustable fence |
(45) | Clamping wheel for bevel angle |
(46) | Locking lever for bevel angle |
(47) | Opening for workpiece support (on power tool) |
(48) | Opening for second workpiece support (on workpiece support) |
(49) | Threaded bolts |
(50) | Dust extraction adapter |
(51) | Hex socket screw for mounting the saw blade |
(52) | Clamping flange |
(53) | Inner clamping flange |
(54) | Fastening screws for insert plate |
(55) | Screw for laser protection cap |
(56) | Fastening screw for laser housing |
(57) | Laser housing |
(58) | Angle indicator for mitre angles |
(59) | Screw for mitre angle indicator |
(60) | Screw for bevel angle indicator |
(61) | Recessed handles |