Product features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Lock button for on/off switch |
(2) | Right handle (insulated gripping surface) |
(3) | Spindle lock button |
(4) | Wing bolt for parallel guide rods (2x) |
(5) | Chip protection |
(6) | Base plate |
(7) | Guide plate |
(8) | Holder for parallel guide rods |
(9) | Step buffer |
(10) | Protective sleeve |
(11) | Wing bolt for depth stop adjustment |
(12) | Slide with index mark |
(13) | Depth stop |
(14) | Scale for setting routing depth |
(15) | Left handle (insulated gripping surface) |
(16) | Clamping lever for locking the routing depth |
(17) | Unlocking lever for guide bushing |
(18) | Router bitA) |
(19) | On/off switch |
(20) | Speed preselection thumbwheel |
(21) | Cap nut with collet |
(22) | Open-ended spanner (19 mm) |
(23) | Extraction hose (dia. 35 mm)A) |
(24) | Dust extraction adapter |
(25) | Knurled screw for dust extraction adapter (2x) |
(26) | Guide rod for parallel guide (2x) |
(27) | Parallel guide |
(28) | Centring pinA) |
(29) | Wing bolt for centring pinA) |
(30) | Curve guideA) |
(31) | Router compass/guide rail adapterA) |
(32) | Handle for router compassA) |
(33) | Wing bolt for router compass coarse adjustment (2x)A) |
(34) | Wing bolt for router compass fine adjustment (1x)A) |
(35) | Knob for router compass fine adjustmentA) |
(36) | Centring screwA) |
(37) | Guide railA) |
(38) | Spacer plate (part of the router compass set) |
(39) | Guide bushing |
- A)
Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.