Starting Operation

Switching on/off

Make sure that you are able to press the On/Off switch without releasing the handle.

To switch on the power tool, slide the on/off switch (3) forward so that "I" appears on the switch.

To switch off the power tool, slide the on/off switch (3) backwards so that "0" appears on the switch.

The worklight improves visibility in the immediate work area. It is automatically switched on and off with the power tool.

The worklight is also switched on if a button on the user interface (2) is pressed. It will go out again approximately 10 s after the last press of a button.

Do not look directly into the worklight; it can blind you.

Note: If the power tool shuts down automatically because the battery is flat or overheated, switch the power tool off using the on/off switch (3).
Charge the battery or let it cool down before switching the power tool on again. Failure to do so can damage the battery.