Practical Advice

Errors – causes and corrective measures

Cause

Corrective measure

A Bluetooth® connection cannot be established with the cordless worklight.

The cordless worklight is not emitting a Bluetooth® signal.

Remove the coin cell (10) and rechargeable battery (8) for 10 seconds.

The cordless worklight cannot be operated via Bluetooth® even though the battery is inserted and charged.

The Bluetooth® module is not activated.

Press the on/off switch (2) repeatedly until the cordless worklight can be operated via Bluetooth®.

The cordless worklight cannot be switched on after wireless charging.

The inductively chargeable battery has to be re-initialised.

Remove the rechargeable battery (8) for 10 seconds.

The PIN for the Bluetooth® connection is not working.

The PIN must be reset to factory settings.

Remove the coin cell (10) and rechargeable battery (8) for 10 seconds.