Inserting/changing the saw blade (Accessory)

When fitting or changing the saw blade, wear protective gloves. Blades are sharp and can become hot when used for prolonged periods of time.

While replacing the saw blade, ensure that the saw blade receptacle is free of material residue, e.g. wood or metal chips.

You will find an overview of recommended saw blades at the end of these operating instructions. Only use saw blades with a 1/2" universal shank. The saw blade should not be longer than required for the intended cut.

Press the lever for saw blade release (4) counterclockwise to the stop and hold it in place. Push the saw blade (2) into the saw blade receptacle (21). Release the lever for saw blade release again.

Check that it is seated securely by pulling the saw blade. A loose saw blade can fall out and lead to injuries.

For particular jobs, the saw blade (2) can also be flipped 180° (teeth point upwards) and refitted.

Let the saw blade cool down before removing it. There is a risk of injury when touching the hot saw blade.

Press the lever for saw blade release (4) counterclockwise to the stop and hold it in place. Remove the saw blade (2). Release the lever for saw blade release again.

Inserting/changing the saw blade (Accessory)

Selecting the saw blade

Inserting the saw blade (see figure A)

Removing the saw blade (see figure A)